Journal
/
Ingenieurwesen
/
Microfluidic Fabrication Techniques for High-Pressure Testing of Microscale Supercritical CO2 Foam Transport in Fractured Unconventional Reservoirs
JoVE Journal
Ingenieurwesen
Zum Anzeigen dieser Inhalte ist ein JoVE-Abonnement erforderlich.  Melden Sie sich an oder starten Sie Ihre kostenlose Testversion.
JoVE Journal Ingenieurwesen
Microfluidic Fabrication Techniques for High-Pressure Testing of Microscale Supercritical CO2 Foam Transport in Fractured Unconventional Reservoirs

Microfluidic Fabrication Techniques for High-Pressure Testing of Microscale Supercritical CO2 Foam Transport in Fractured Unconventional Reservoirs

DOI:
10.3791/61369-v

•

10:06 min

•

July 02, 2020

•

, , ,
1Department of Chemical and Petroleum Engineering,University of Kansas, 2Department of Chemical Engineering,University of Wyoming

Kapitel

  • 00:05Introduction
  • 01:58Transfer of Geometric Patterns to the Glass Substrate Using Photolithography
  • 03:47Clean and Bond
  • 06:43High Pressure Testing
  • 08:16Results: Analysis of scCO2 Microstructure
  • 09:21Conclusion

Summary

Automatische Übersetzung

Automatische Übersetzung

This paper describes a protocol along with a comparative study of two microfluidic fabrication techniques, namely photolithography/wet-etching/thermal-bonding and Selective Laser-induced Etching (SLE), that are suitable for high-pressure conditions. These techniques constitute enabling platforms for direct observation of fluid flow in surrogate permeable media and fractured systems under reservoir conditions.

Tags

Microfluidic FabricationHigh-pressure TestingSupercritical CO2 FoamFractured Unconventional ReservoirsPolyelectrolyte Complex NanoparticlesHigh Pressure MicrofluidicsComplex Permeable MediaCCUSChrome EtchingBorosilicate SubstratePhoto ResistUV LightDeveloper Solution

Article

Embed

ZUR WIEDERGABELISTE HINZUFÜGEN

Usage Statistics

Verwandte Videos

Fabrication of VB2/Air Cells for Electrochemical Testing

Synthesis and Microdiffraction at Extreme Pressures and Temperatures

Fabrication and Testing of Microfluidic Optomechanical Oscillators

Thermal Measurement Techniques in Analytical Microfluidic Devices

Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5

Solvent Bonding for Fabrication of PMMA and COP Microfluidic Devices

Subsurface Defect Localization by Structured Heating Using Laser Projected Photothermal Thermography

Fabrication of Polymer Microspheres for Optical Resonator and Laser Applications

Focused Ion Beam Fabrication of LiPON-based Solid-state Lithium-ion Nanobatteries for In Situ Testing

In Situ High Pressure Hydrogen Tribological Testing of Common Polymer Materials Used in the Hydrogen Delivery Infrastructure

Read Article