Journal
/
Ingenieurwesen
/
Multi-material Ceramic-Based Components – Additive Manufacturing of Black-and-white Zirconia Components by Thermoplastic 3D-Printing (CerAM – T3DP)
JoVE Journal
Ingenieurwesen
This content is Free Access.
JoVE Journal Ingenieurwesen
Multi-material Ceramic-Based Components – Additive Manufacturing of Black-and-white Zirconia Components by Thermoplastic 3D-Printing (CerAM – T3DP)

Multi-material Ceramic-Based Components – Additive Manufacturing of Black-and-white Zirconia Components by Thermoplastic 3D-Printing (CerAM – T3DP)

DOI:
10.3791/57538-v

•

08:29 min

•

January 07, 2019

•

, , , , , ,
1Fraunhofer Institute for Ceramic Technologies and Systems IKTS, 2Fraunhofer Singapore

Kapitel

  • 00:04Titel
  • 00:49The Thermoplastic Suspension for Thermoplastic 3D-printing
  • 03:31Manufacture of Single and Multi-material Components
  • 05:33Co-debinding and Co-sintering of Multi-material Components
  • 06:53Results: Characterization of Multimaterial Zirconia Components
  • 07:47Conclusion

Summary

Automatische Übersetzung

Automatische Übersetzung

Here we describe a protocol for additively manufacturing black-and-white zirconia components by Thermoplastic 3D-Printing (CerAM - T3DP) and co-sintering defect-free.

Tags

Ceramic ComponentsAdditive ManufacturingThermoplastic 3D PrintingMulti-materialZirconiaBlack And WhiteParticle SizeSuspension PreparationRheology

Article

Embed

ZUR WIEDERGABELISTE HINZUFÜGEN

Usage Statistics

Verwandte Videos

check_url/de/57538?article_type=v

Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics
check_url/de/57538?article_type=v

Micro-masonry for 3D Additive Micromanufacturing
check_url/de/57538?article_type=v

Synthesis and Characterization of High c-axis ZnO Thin Film by Plasma Enhanced Chemical Vapor Deposition System and its UV Photodetector Application
check_url/de/57538?article_type=v

Experimental Procedure for Warm Spinning of Cast Aluminum Components
check_url/de/57538?article_type=v

3D Printing of Biomolecular Models for Research and Pedagogy
check_url/de/57538?article_type=v

High Temperature Fabrication of Nanostructured Yttria-Stabilized-Zirconia (YSZ) Scaffolds by In Situ Carbon Templating Xerogels
check_url/de/57538?article_type=v

Fused Filament Fabrication (FFF) of Metal-Ceramic Components
check_url/de/57538?article_type=v

Additive Manufacturing of Functionally Graded Ceramic Materials by Stereolithography
check_url/de/57538?article_type=v

Multimodal 3D Printing of Phantoms to Simulate Biological Tissue
check_url/de/57538?article_type=v

Manufacturing, Control, and Performance Evaluation of a Gecko-Inspired Soft Robot

Read Article