Journal
/
Ingenieurwesen
/
A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing
JoVE Journal
Ingenieurwesen
Zum Anzeigen dieser Inhalte ist ein JoVE-Abonnement erforderlich.  Melden Sie sich an oder starten Sie Ihre kostenlose Testversion.
JoVE Journal Ingenieurwesen
A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing

A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing

DOI:
10.3791/56925-v

•

08:29 min

•

August 10, 2018

•

, , ,
1Department of Engineering Physics,McMaster University, 2Department of Physics, Engineering Physics and Astronomy,Queen’s University

Kapitel

  • 00:04Titel
  • 00:44The Chamber Parts and Top Chamber Assembly
  • 03:13Bottom Chamber Assembly
  • 05:22Final Assembly
  • 06:05Current-Voltage Measurements of Individual Pixels on the Device
  • 07:09Results: Current Density Voltage Measurements of a 6 Diode Configuration
  • 07:42Conclusion

Summary

Automatische Übersetzung

Automatische Übersetzung

Here, we present a protocol for the design, manufacture, and use of a simple, versatile 3D-printed and controlled atmospheric chamber for the optical and electrical characterization of air-sensitive organic optoelectronic devices.

Tags

3D PrintingOrganic OptoelectronicsEnvironmental ChamberDevice Degradation TestingRapid PrototypingVersatile DesignCost-effectiveModular ComponentsO-ringRetaining RingThreaded InsertsOrganic Device Testing

Article

Embed

ZUR WIEDERGABELISTE HINZUFÜGEN

Usage Statistics

Verwandte Videos

Controlling the Size, Shape and Stability of Supramolecular Polymers in Water

Characterization of Recombination Effects in a Liquid Ionization Chamber Used for the Dosimetry of a Radiosurgical Accelerator

Methods for Measuring the Orientation and Rotation Rate of 3D-printed Particles in Turbulence

Testing of Nanoparticle Release from a Composite Containing Nanomaterial Using a Chamber System

Scanning Light Scattering Profiler (SLPS) Based Methodology to Quantitatively Evaluate Forward and Backward Light Scattering from Intraocular Lenses

Subsurface Defect Localization by Structured Heating Using Laser Projected Photothermal Thermography

Preparation of Liquid Crystal Networks for Macroscopic Oscillatory Motion Induced by Light

Atmospheric Pressure Fabrication of Large-Sized Single-Layer Rectangular SnSe Flakes

A Standard and Reliable Method to Fabricate Two-Dimensional Nanoelectronics

Method Development for Contactless Resonant Cavity Dielectric Spectroscopic Studies of Cellulosic Paper

Read Article