Journal
/
Ingenieurwesen
/
Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
JoVE Journal
Ingenieurwesen
Zum Anzeigen dieser Inhalte ist ein JoVE-Abonnement erforderlich.  Melden Sie sich an oder starten Sie Ihre kostenlose Testversion.
JoVE Journal Ingenieurwesen
Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators

Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators

DOI:
10.3791/51251-v

•

11:44 min

•

August 15, 2014

•

, , , ,
1Department of Electrical and Computer Engineering,University of California, Davis, 2Digital Light Projection (DLP) Technology Development,Texas Instruments, 3Birck Nanotechnology Center and the Department of Electrical and Computer Engineering,Purdue University

Kapitel

  • 00:05Titel
  • 01:08Fabrication of Electrostatic Fringing-field Actuated (EFFA) MEMS Fixed-fixed Beams
  • 08:28Experimental Validation of Dynamic Waveform Biasing
  • 10:23Results: Measured Pull-down and Released States of a MEMS Bridge
  • 11:16Conclusion

Summary

Automatische Übersetzung

Automatische Übersetzung

The robust device design of fringing-field electrostatic MEMS actuators results in inherently low squeeze-film damping conditions and long settling times when performing switching operations using conventional step biasing. Real-time switching time improvement with DC-dynamic waveforms reduces the settling time of fringing-field MEMS actuators when transitioning between up-to-down and down-to-up states.

Tags

Real-time DC-dynamic BiasingSwitching Time ImprovementUnderdamped Fringing-field Electrostatic MEMS ActuatorsFast Switching OperationSettling TimeTransient Applied Bias WaveformsMechanical Quality FactorSubstrate RemovalReliabilityStictionCharge PumpCMOS ProcessingExperimental ValidationSwitching Time Improvement

Article

Embed

ZUR WIEDERGABELISTE HINZUFÜGEN

Usage Statistics

Verwandte Videos

Fabrication Process of Silicone-based Dielectric Elastomer Actuators

Compact Lens-less Digital Holographic Microscope for MEMS Inspection and Characterization

Free-form Light Actuators — Fabrication and Control of Actuation in Microscopic Scale

Fabrication of 3D Carbon Microelectromechanical Systems (C-MEMS)

Design and Characterization Methodology for Efficient Wide Range Tunable MEMS Filters

Growth and Electrostatic/chemical Properties of Metal/LaAlO3/SrTiO3 Heterostructures

Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers

Optimized Sealing Process and Real-Time Monitoring of Glass-to-Metal Seal Structures

Rapid Manufacturing of Thin Soft Pneumatic Actuators and Robots

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VOx

Read Article