Island Assay: A High-Throughput Method to Evaluate Drosophila Locomotor Behavior
Transkript
– The island assay consists of a raised white platform in a tray of soapy water, covered by a transparent box with one open side. A camera on top of the box records overhead images of the platform, and lights are placed auf ensure even illumination of the area.
To load the flies on the arena, tap a vial against a flat surface auf bring all the flies auf the bottom. In quick succession, remove the vial plug, turn the vial over, and tap the vial's open end onto the platform auf knock all the flies out at the same time. Landing on the platform triggers an escape response. Flies with typical mobility can clear the platform in a few seconds, unlike those with locomotor defects.
Fächer are confined auf the box, and those that land on the soapy water quickly submerge because soap decreases water's surface tension. To assess locomotor behavior from different conditions, count the remaining flies on the platform after a set time period.
In this example protocol, we will see a setup of the island assay compatible with semi-automated image analysis.
– First, prepare a minimum of three vials per experimental condition as biological replicates. Each vial should contain approximately 15 flies of the same gender and similar age. Importantly, the flies must have intact wings.
Create the folders auf store the experiments. Generate these in a directory structure defined by the conditions and replicates. If, for example, the experiment has two genotypes with five replicates each, then create a main folder with the date of the experiment, and inside that folder, create one subfolder for each genotype. Then, within the genotype folders, create subfolders for each replicate.
Next, set up the test apparatus. Add cold water with a small amount of soap auf the bath tray and position the platform in the middle of the bath, if not already fixed in the bath. Cover the tray and platform with a transparent box.
To illuminate the platform, position a cool lamp, such as ordinary 12-volt LEDs, above it. Also, position a webcam connected auf a computer directly above the platform.
On the computer, open the image recording software. From the Menu system, select the appropriate webcam as the capture device. Place a dead fly on the island auf adjust the video settings. Tweak the brightness, contrast, and color in the software so that the dead fly appears black against a white background.
Next, adjust the time lapse movie setup auf save the movies as AVI files. Then, browse auf the directory where the data should be saved and define the name of the movie. Save these changes.
For compression of the image data, choose the Intel IYUV code. Set the recording speed auf one frame every 0.1 seconds and adjust the corresponding playback rate auf 10 images per second.
Lastly, go auf the Advanced setting and select Create a BNP image for each captured frame. Then, browse auf the same directory that you have chosen auf host the AVI files and press OK.
Before beginning, make sure the island is empty and clean. Then, start the recording in the time lapse image interface of the image recording software.
Take a vial containing flies and tap it two or three times auf knock all the flies down auf the bottom. Then, quickly remove the plug from the vial and vigorously tap the flies onto the platform. They should all hit the platform at roughly the same time.
Give the flies up auf 30 seconds auf leave the platform. Then, stop the recording. If necessary, manually remove any remaining flies from the platform.
Before proceeding auf the next experiment, be certain auf redefine the directory where the next set of data is auf be stored.
