Generating Retinal Injury Models in <em>Xenopus</em> Tadpoles

Karine Parain; Alicia Donval; Albert Chesneau; Jing Xian Lun; Caroline Borday; Muriel Perron

doi:10.3791/65771

JoVE Journal > Developmental Biology

Entwicklungsbiologie

Generating Retinal Injury Models in Xenopus Tadpoles

Published: October 13, 2023

doi:

10.3791/65771

Karine Parain*¹, Alicia Donval*¹, Albert Chesneau*¹, Jing Xian Lun¹, Caroline Borday¹, Muriel Perron¹

¹Paris-Saclay Institute of Neuroscience, CNRS,Université Paris-Saclay

Summary

We have developed several protocols to induce retinal damage or retinal degeneration in Xenopus laevis tadpoles. These models offer the possibility of studying retinal regeneration mechanisms.

Abstract

Retinal neurodegenerative diseases are the leading causes of blindness. Among numerous therapeutic strategies being explored, stimulating self-repair recently emerged as particularly appealing. A cellular source of interest for retinal repair is the Müller glial cell, which harbors stem cell potential and an extraordinary regenerative capacity in anamniotes. This potential is, however, very limited in mammals. Studying the molecular mechanisms underlying retinal regeneration in animal models with regenerative capabilities should provide insights into how to unlock the latent ability of mammalian Müller cells to regenerate the retina. This is a key step for the development of therapeutic strategies in regenerative medicine. To this aim, we developed several retinal injury paradigms in Xenopus: a mechanical retinal injury, a transgenic line allowing for nitroreductase-mediated photoreceptor conditional ablation, a retinitis pigmentosa model based on CRISPR/Cas9-mediated rhodopsin knockout, and a cytotoxic model driven by intraocular CoCl₂ injections. Highlighting their advantages and disadvantages, we describe here this series of protocols that generate various degenerative conditions and allow the study of retinal regeneration in Xenopus.

Introduction

Millions of people worldwide are afflicted with various retinal degenerative diseases leading to blindness, such as retinitis pigmentosa, diabetic retinopathy, or age-related macular degeneration (AMD). To date, these conditions remain largely untreatable. Current therapeutic approaches under evaluation include gene therapy, cell or tissue transplantations, neuroprotective treatments, optogenetics, and prosthetic devices. Another emerging strategy is based on self-regeneration through the activation of endogenous cells with stem cell potential. Müller glial cells, the major glial cell type of the retina, are among cellular sources of interest in this context. Upon injury, they can dedifferentiate, proliferate, and generate neurons¹^,²^,³. Although this process is very effective in zebrafish or Xenopus, it is largely inefficient in mammals.

Nonetheless, it has been shown that appropriate treatments with mitogenic proteins or overexpression of various factors can induce mammalian Müller glia cell-cycle re-entry and, in some cases, trigger their subsequent neurogenesis commitment¹^,²^,³^,⁴^,⁵. This remains, however, largely insufficient for treatments. Hence, increasing our knowledge of the molecular mechanisms underlying regeneration is necessary to identify molecules able to efficiently turn Müller stem-like cell properties into new cellular therapeutic strategies.

With this aim, we developed several injury paradigms in Xenopus that trigger retinal cell degeneration. Here, we present (1) a mechanical retinal injury that is not cell type-specific, (2) a conditional and reversible cell ablation model using the NTR-MTZ system that targets rod cells, (3) a CRISPR/Cas9-mediated rhodopsin knockout, a model of retinitis pigmentosa that triggers progressive rod cell degeneration, and (4) a CoCl₂-induced cytotoxic model that according to the dose can specifically target cones or lead to broader retinal cell degeneration. We highlight the particularities, advantages, and disadvantages of each paradigm.

Protocol

Animal care and experimentation were conducted in accordance with institutional guidelines, under the institutional license A91272108. The study protocols were approved by the institutional animal care committee CEEA #59 and received authorization by the Direction Départementale de la Protection des Populations under the reference number APAFIS #32589-2021072719047904 v4 and APAFIS #21474-2019071210549691 v2. See the Table of Materials for details related to all materials, instruments, and reagents used in these protocols.

1. Mechanical retinal injury

NOTE: The injury paradigm protocol described here consists of a mechanical retinal puncture of a tadpole from stage 45 onwards. It, therefore, does not target any particular retinal cell type but damages the whole thickness of the retina at the puncture site.

Preparation of the anesthetic for tadpoles
1. Prepare a 10% stock solution of benzocaine. For a total volume of 10 mL, add 1 g of benzocaine, 2 mL of dimethyl sulfoxide (DMSO), and 8 mL of propylene glycol. Conserve the stock solution for several months at 4 °C protected from light with aluminum foil.
2. Prepare 0.005% benzocaine solution at the time of use by adding 25 µL of 10% benzocaine stock solution to 50 mL of tadpole-rearing water (filtered and dechlorinated tap water). Mix well.
  NOTE: The concentration of benzocaine is particularly low because tadpoles are highly sensitive to anesthesia compared to adults.
Pin preparation
1. Attach a 0.2 mm diameter sterile pin to a sterilized pin holder (Figure 1A).
Tadpole anesthesia
1. Use a dip net to catch tadpoles in their tanks. Transfer them into a new tank containing the 0.005% benzocaine solution. Wait a few minutes until the tadpoles stop reacting to stimuli (tapping the tank or direct contact).
  NOTE: Several tadpoles may be anesthetized simultaneously, but the time spent in the anesthetic solution should be less than 30 min.
Retinal puncture
1. Use a spoon to catch one tadpole and put it carefully on a small Petri dish (55 mm diameter) containing a wet tissue. Position the tadpole dorsal side up in the middle of the Petri dish.
2. Under a stereomicroscope, puncture the retina by gently inserting the pin on the dorsal side of the eye, until it passes through the retina (Figure 1A). If several pokes are needed, repeat this procedure at different places. After puncturing the right eye, turn the Petri dish 180° to puncture the left eye.
3. Transfer the lesioned tadpole to a large tank containing 1 L of rearing water by carefully immersing the Petri dish. Monitor the tadpoles until they are fully awakened.

2. Conditional rod cell ablation using the NTR-MTZ system

The protocol aims to induce specific rod cell ablation in the Xenopus Tg(rho:GFP-NTR) transgenic line⁶, available at the TEFOR Paris-Saclay's zootechnics service, which hosts the French Xenopus resource center. This chemogenetic system uses the capacity of nitroreductase (NTR) enzyme to convert the prodrug metronidazole (MTZ) into a cytotoxic DNA cross-linking agent, to specifically ablate NTR-expressing rods (Figure 1B). Two detailed protocols to make Tg(rho:GFP-NTR) or Tg(rho:NTR) transgenic animals and induce degeneration have been published previously ⁷^,⁸. Here, we simply detail the induction of retinal degeneration and how to monitor the degeneration process in vivo.

Preparation of metronidazole solution
1. Prepare 10 mM MTZ solution at the time of use by dissolving 1.67 g of MTZ powder in a dark bottle in 1 L of tadpole-rearing water containing 0.1% DMSO, using a magnetic stir-bar and a magnetic agitator.
  NOTE: MTZ is light-sensitive. Complete dissolution may take up to 10 min.
Generating transgenic tadpoles by natural mating from the Tg(rho:GFP-NTR) line
NOTE: Since transgenic males represent a precious stock, we prefer to generate embryos via natural mating to not sacrifice the male and to use it repeatedly.
1. Hormone administration
  1. Inject 600 I.U. of human chorionic gonadotropin hormone (hCG) with 25G needles into the dorsal lymph sac of Xenopus laevis wild-type females. Inject transgenic males with 100-200 I.U. of hCG into the dorsal lymph sac. For live monitoring of rod degeneration (step 2.4), use albino Xenopus rather than pigmented ones, to better visualize fluorescence variations across the eye of the generated transgenic tadpoles.
    NOTE: Xenopus females can be primed with 50 I.U. of hCG 1 to 7 days before planned ovulation, but this is optional.
2. Mating and egg collection
  1. Immediately after the hCG injection, put in a tank one Tg(rho:GFP-NTR) transgenic male together with one hCG-injected female at 20 °C until the next day. Use a large volume (at least 10 L) and add small objects for the eggs to adhere to, so that the eggs are not damaged by the adults' movements. The following day, when the frogs are no longer in amplexus, remove the adults from the tank and collect embryos.
3. Raising of embryos and tadpoles
  1. Stage embryos and tadpoles according to the normal table of Xenopus development⁹.
  2. Raise embryos in a tank filled with tadpole-rearing water. From stage 45, feed tadpoles with powdered fry food and oxygenate the water with a bubbler. Add water daily if necessary to compensate for evaporation and change the whole tank water weekly.
    NOTE: Alternatively, it is also possible to exchange 50% of the volume twice a week. A detailed protocol can be found in¹⁰.
4. Transgenic embryo sorting
  1. From stage 37/38, sort and select transgenic embryos under a fluorescence stereomicroscope by directly visualizing GFP (Figure 1C).
Tadpole MTZ treatment
1. Transfer Tg(rho:GFP-NTR) transgenic tadpoles to a tank containing 10 mM MTZ solution and rear them at 20 °C in darkness for 1 week. Use transgenic siblings raised in tadpole-rearing water containing 0.1% DMSO as controls.
2. Change the MTZ and control solution every other day during the treatment period. Feed the tadpoles as usual during the MTZ treatment.
3. For individual fluorescence monitoring (step 2.4), place each tadpole in its small container with 30 mL of MTZ or control solution from step 2.3.1 onward.
  NOTE: MTZ treatment can be performed at any time from stage 45 onwards.
Live monitoring of rod degeneration
NOTE: The progressive degeneration of the rods can be monitored in real time. Therefore, perform steps 2.4.1. to 2.4.4. before MTZ treatment and then regularly after treatment.
1. Follow steps 1.1 and 1.3 for the preparation of the anesthetic and the tadpole anesthesia, respectively.
2. Use a spoon to catch one tadpole and put it carefully on a wet tissue in a small Petri dish (55 mm diameter). Observe the GFP fluorescence under a fluorescent stereomicroscope (excitation wavelength = 488 nm and emission wavelength = 509 nm) and take photographs of the eye. A decreased fluorescence intensity reflects the degradation of rods.
  NOTE: To make quantitative comparisons, the same settings must be maintained for imaging all tadpoles.
3. Transfer the imaged tadpole to a large tank containing 1 L of rearing water by carefully immersing the Petri dish. Monitor the tadpoles until they are fully awakened.
4. Compare the fluorescence intensity between MTZ-treated and control tadpole eyes to monitor and assess the efficacy of the degeneration process.

3. Rod cell degeneration by CRISPR/Cas9-mediated rhodopsin knockout

NOTE: This protocol is established to generate a model of retinitis pigmentosa in Xenopus laevis by inducing specific rod cell degeneration using CRISPR/Cas9-mediated rhodopsin knockout. The % of insertion-deletion (indels) in F0 is provided in¹¹ and is ~75%. Such a CRISPR/Cas9-mediated rhodopsin knockout can also be performed in Xenopus tropicalis tadpoles ¹¹.

Preparation of solutions and reagents
1. crRNA and tracrRNA ordering
  1. Buy the synthetic CRISPR RNA (crRNA) targeting the rhodopsin (rho) gene and the standard trans-activating crRNA (tracrRNA). The crRNA is composed of a rho target-specific region (GCUCUGCUAAGUAAUACUGA) and another one (GUUUUAGAGCUAUGCU) that hybridizes to the tracrRNA.
2. crRNA:tracrRNA duplex (rho gRNA duplex)
  1. Resuspend crRNA and tracrRNA at 100 µM in the nuclease-free duplex buffer.
  2. Prepare the gRNA duplex by mixing 3 µL of 100 µM rho crRNA, 3 µL of 100 µM tracrRNA, and 94 µL of duplex buffer. The final concentrations are 36 ng/µL rho crRNA, and 67 ng/µL tracrRNA.
  3. Anneal the oligos by heating them at 95 °C for 5 min and slowly cool them to room temperature. Make aliquots and store them at -20 °C.
3. CRISPR-Cas9 ribonucleoprotein complex (i.e., gRNA duplex/Cas9 protein)
  1. At the time of use, prepare the mixture of rho gRNA duplex and the Cas9 protein. For 20 µL, add 10 µL of the rho gRNA duplex solution, 2 µL of Cas9 protein (stock at 5 mg/mL), 2 µL of fluorescein lysine dextran (stock at 10 mg/mL), and 6 µL of RNase-free water.
  2. To form the ribonucleoprotein complex, incubate for 10 min at 37 °C and let the solution cool to room temperature.
  3. For 20 µL of the control solution, mix 2 µL of Cas9 protein, 2 µL of fluorescein lysine dextran, and 16 µL of RNase-free water.
4. Preparation of 10x, 1x, and 0.1x MBS solutions
  1. Prepare Modified Barth's Saline stock solution (10x MBS) by adding 11.92 g of HEPES, 51.43 g of sodium chloride (NaCl), 0.75 g of potassium chloride (KCl), 2.1 g of sodium bicarbonate (NaHCO₃), and 2.46 g of magnesium sulfate heptahydrate (MgSO₄, 7 H₂O) in 800 mL of type II water. Adjust the pH to 7.8 with 30% sodium hydroxide (NaOH). Add type II water until the volume is 1 L and sterilize by autoclaving. Store at room temperature.
  2. Prepare 1 L of 1x MBS solution by diluting 100 mL of 10x MBS salt solution and 7 mL of 0.1 M calcium chloride dihydrate (CaCl₂, 2H₂O) in type II water. Store at room temperature.
  3. Prepare 0.1x MBS solution by diluting 1x MBS solution in type II water. Store at room temperature.
5. Benzocaine solution for adults
  1. Prepare 0.05% benzocaine solution by adding 5 mL of 10% benzocaine stock solution (see step 1.1.1.) to 1 L of tadpole-rearing water. Mix well.
    NOTE: Conserve this solution for several months at 4 °C protected from light with aluminum foil. Bring the solution to room temperature before being used on animals.
6. L-cysteine solution
  1. Prepare the dejellying solution at the time of use by adding 2 g of L-cysteine hydrochloric monohydrate to 100 mL of 0.1x MBS solution. Adjust the pH to 7.8 with 30% NaOH.
7. Polysucrose solution
  1. Prepare the dense polysucrose solution by adding 3 g of polysucrose to 100 mL of 0.1x MBS solution. Store this solution for a few weeks at 4 °C.
In vitro fertilization and dejellying
NOTE: More details about Xenopus in vitro fertilization can be found in a detailed dedicated protocol in¹².
1. Hormone administration to Xenopus laevis females to induce ovulation
  1. Approximately 15 h prior to oocyte harvesting, inject 600 I.U. of hCG into the dorsal lymph sac of the female and keep it overnight at 18 °C.
2. Testis dissection
  1. Euthanize the Xenopus male with a lethal dose of 0.05% benzocaine solution for 10-15 min. As a complementary euthanasia method, sever the spine immediately posterior to the skull with sharp and sturdy scissors. Open the abdominal cavity with dissection scissors, cut the testes out, and trim away any attached fat and capillaries. Place each testis immediately on ice in 1 mL of 1x MBS.
3. Sperm preparation
  1. Crush one testis using a pestle for microcentrifuge tubes and dilute the suspension in a 15 mL tube containing 9 mL of 1x MBS. Add 10 µg/mL of gentamicin to the second testis tube and keep it at 4 °C for a few days for further fertilization experiments.
4. In vitro fertilization
  1. Gently massage the back of the hormone-injected female and collect the oocytes in a Petri dish (100 mm diameter). Spread a few drops of the sperm solution to the oocytes. Wait 5 min and cover them with 0.1x MBS. Wait 10 min before proceeding with dejellying.
5. Fertilized egg dejellying
  1. Replace the 0.1x MBS solution with the dejellying solution to remove the jelly coat from the fertilized eggs (~5 min). Thoroughly rinse the embryos 5-6 times with 0.1x MBS and transfer them to a new 100 mm Petri dish filled with 0.1x MBS.
Preparation of the microinjection system
1. Sharpen glass capillaries with a micropipette puller¹³.
2. Fill a sharpened capillary with 2-10 µL of CRISPR-Cas9 ribonucleoprotein complex or the control solution using a microloader tip and place the capillary into the microinjector handler.
3. At the highest magnification of a stereomicroscope, break off the capillary tip with fine forceps, and adjust the injection time (~400 ms) to obtain an ejection volume of 10 nL per pulse. Set the ejection pressure to around 40 PSI.
One-cell-stage embryo microinjection with the CRISPR-Cas9 ribonucleoprotein complex
1. Place one-cell-stage embryos on a grid (1 mm nylon tissue) glued in a 100 mm Petri dish filled with 3% polysucrose solution (Figure 1D).
2. Using the microinjector and under a stereomicroscope, inject 10 nL of the CRISPR-Cas9 ribonucleoprotein complex (which corresponds to 500 pg of gRNA duplex + 5 ng of Cas9 protein per embryo) or control solution at the level of the animal pole, in the cortical region, just under the cytoplasmic membrane.
  NOTE: The fluorescein lysine dextran contained in the solution allows subsequent sorting of the injected embryos.
3. Transfer the injected embryos to a new 100 mm Petri dish containing a clean polysucrose solution and place them at 21 °C.
4. On the first day, regularly sort out the well-developed embryos and replace the polysucrose solution with 0.1x MBS around 5 h after microinjection.
5. Wait for 24 h after injection to sort and select well-injected rho crispant embryos under a fluorescent stereomicroscope by visualizing fluorescein lysine dextran (Figure 1E).
  NOTE: The earlier the microinjection after fertilization, the more effective the knockout.
Raising of embryos and tadpoles
1. Raise rho crispant embryos in 0.1x MBS in Petri dishes until stage 37/38. Remove dead embryos daily and change the 0.1x MBS solution. From stage 37/38, raise embryos in a tank filled with tadpole-rearing water, and from stage 45 proceed as in step 2.2.3.

4. Retinal cell degeneration by cytotoxic intraocular CoCl ₂ injections

NOTE: This protocol is established to induce retinal cell degeneration by intraocular injections of cobalt chloride (CoCl₂) in Xenopus laevis tadpoles. According to the dose, it can trigger a cone-specific degeneration or a broader degeneration¹⁴. We use this protocol in Xenopus laevis tadpoles aged from stage 48 onwards. It can also be used in Xenopus tropicalis tadpoles.

Preparation of buffer and reagents
1. Prepare 0.005% benzocaine solution at the time of use as in step 1.1.
2. Prepare 100 mM CoCl₂ stock solution by adding 118.5 mg to 5 mL of 0.1x MBS (see step 3.1.4 to prepare 0.1x MBS). Conserve this stock solution for several months at 4 °C, protected from light with aluminum foil.
  CAUTION: CoCl₂ is classified as a toxic compound for human and animal life. Carefully follow the instructions for handling, storage, and waste disposal on the safety data sheet.
3. For cone-specific degeneration, prepare a 10 mM CoCl₂ solution at the time of use from the 100 mM stock solution diluted in 0.1x MBS. For broader retinal cell degeneration, prepare a 25 mM CoCl₂ solution.
Preparation of the injection system
1. Sharpen glass capillaries with a micropipette puller ¹³.
2. Fill a sharpened capillary with 2-10 µL of 10 or 25 mM CoCl₂ solution or the control solution (0.1x MBS) using a microloader tip and place the capillary into the microinjector handler.
3. At the highest magnification of a stereomicroscope, break off the capillary tip with fine forceps, and adjust the injection time (approximately 100 ms) to obtain an ejection volume of 15-40 nL per pulse. Set the ejection pressure to ~40 PSI.
  NOTE: The size of the drop should be adapted to the stage of the tadpoles and the size of their eye. For example, at stages 48-49, the drop size is ~15-20 nL, while it is 30-40 nL at stages 52-56. Visually, the size of the drop is a little larger than the lens size.
CoCl₂ intraocular injections
1. Use a dip net to catch tadpoles in their tanks. Transfer them to 50 mL of 0.005% benzocaine solution. Wait a few minutes until the tadpoles stop reacting to the stimuli.
  NOTE: Several tadpoles may be anesthetized at the same time, but the time spent in the anesthetic should be less than 30 min.
2. Use a spoon to catch one tadpole and put it carefully in a small Petri dish (55 mm diameter) containing a wet tissue. Position the tadpole dorsal side up in the middle of the Petri dish (Figure 1F,G).
3. Use the microinjector under a stereomicroscope to inject intraocularly the CoCl₂ solution. Gently insert the capillary into the eye over the lens. When the capillary tip is inside the eye, eject two drops per eye. After injecting the right eye, turn the Petri dish manually 180° to inject the left eye.
  NOTE: Ensure that the injection is done inside the eye, so a slight swelling of the eye must be seen after each ejection of the solution. The tadpole should stay outside the water as little as possible. The injection of both eyes should take less than 1 min.
4. Transfer the injected tadpole to a large tank containing 1 L of rearing water by immersing it carefully in the Petri dish (Figure 1H). Monitor the tadpoles until they are fully awakened.

5. Staining to assess retinal damage or retinal degeneration

Tadpole fixation and dehydration
1. Prepare 4% paraformaldehyde (PFA) solution by diluting 100 mL of 32% PFA solution into 700 mL of 1x PBS. Adjust the pH to 7.4 with NaOH. Aliquot this stock solution and conserve it for several months at -20 °C.
2. Euthanize the tadpoles in 0.01% benzocaine and transfer them into a vial containing 4% PFA for 2 h at room temperature with agitation or overnight at 4 °C. Rinse 3 x 5 min in 1x PBS.
3. Progressively dehydrate tadpoles by successive 30 min incubations in 70% and 95% ethanol (diluted in type II water), followed by three more 1 h incubations in 100% ethanol. Store the tadpole heads at this step at -20 °C or directly transfer them to 100% butanol overnight for further steps.
Paraffin sectioning
1. Replace 100% butanol with melted paraffin for 2 h at 62 °C. Replace the paraffin for 2 x 2 h of additional incubations at 62 °C.
2. Transfer tadpole heads in disposable paraffin embedding molds and orient them so that their eyes are well aligned, and then allow the paraffin to harden. Store the blocks at room temperature.
3. Trim the excess paraffin and mount the block with the embedded tadpole(s) on the microtome support.
4. Section the block with a microtome at the appropriate thickness (10-12 µm). Transfer the ribbons with sections on a slide previously covered with 3% glycerin albumin (diluted in water).
5. Place the slide on a slide warmer at 42 °C for a few minutes and then remove the excess of glycerin albumin. Let the slides dry overnight in an oven at 37 °C.
6. Dewax by immersing the slides for 2 x 15 min in a Coplin jar filled with 100% xylene. Rehydrate the sections with graded ethanol series: 100% twice, 70%, 50% (diluted in type II water), ~5 min each, followed by 2 x 5 min in water.
Immunofluorescence labeling
1. Prepare 100 mM sodium citrate (CiNa) stock solution by adding 29.4 g of sodium citrate trisodium salt dihydrate (C₆H₅Na₃O₇, 2H₂O) to 1 L of Type II water; adjust the pH to 6 with Hydrochloric acid (HCl). Sterilize by autoclaving and store at room temperature for several months. Prepare the unmasking solution at the time of use by adding 25 mL of 100 mM CiNa stock solution to 225 mL of type II water. Add 125 µL of Tween-20 and mix well (final concentration is 10 mM CiNa, 0.05% Tween-20).
2. Prepare Hoechst stock solution at 10 mg/mL by adding 100 mg of bisBenzimide H 33258 to 10 mL of type I water. Conserve this stock solution for several months at 4 °C, protected from light with an aluminum foil. Prepare Hoechst solution at 7.5 µg/mL by adding 300 µL of Hoechst stock solution to 400 mL of 1x PBS.
  NOTE: This solution may be used up to 10 times and conserved for around 6 months at 4 °C, protected from light with aluminum foil.
3. After dewaxing sections, perform antigen retrieval by boiling the sections in the unmasking solution for 9 min. Let the solution cool for 20 min.
4. Rinse once in type II water and once in 1x PBS. Put the slides flat in a humid chamber and add 400-600 µL of blocking solution per slide (antibody diluent + 0.2% Triton X100) for 30 min.
5. Replace the blocking solution with 200 µL per slide of the primary antibody diluted in the blocking solution. Use a coverslip to spread the solution over the sections, avoiding bubble formation. Incubate overnight at 4 °C in a humid chamber.
6. Transfer the slides to a Coplin jar and rinse for 3 x 10 min in 1x PBS supplemented with 0.1 % Triton X100. Put the slides flat, add 400 µL per slide of the secondary antibody diluted in blocking solution, and leave for 2 h at room temperature in a humid chamber.
7. Transfer slides to a Coplin jar and rinse for 3 x 5 min with 1x PBS supplemented with 0.1% Triton X100.
8. Counterstain cell nuclei with the Hoechst solution for 10 min and rinse 3 x 5 min with 1x PBS.
9. Place coverslips over slides in an aqueous mounting medium specifically designed to preserve fluorescence. Let the slides dry for 1 h at room temperature and store them at 4 °C.
10. Image the slides with a fluorescence microscope.
Hematoxylin and eosin (H&E) staining to assess retinal damage
NOTE: Instead of labeling a particular cell type by immunostaining, general retinal histology can be assessed with H&E coloration.
1. After dewaxing sections, perform nucleic acid labeling by immersing slides in hematoxylin solution for 2 min. Rinse well with tap water.
2. Perform cytoplasm labeling by immersing slides in 1% eosin solution for 1 min. Rinse quickly with water.
  NOTE: Eosin is very soluble; if the slides are left too long in the water, all the dye disappears.
3. Rinse 2 x 5 min in 100% ethanol and 2 x 5 min in xylene.
4. Under the hood, place coverslips over the slides in 4-5 drops of a mounting medium. Let the slides dry under a hood and image the following day with a microscope.
Detection of apoptotic cells
1. After dewaxing sections (see section 5.2.6), follow the kit manufacturer's protocol to detect apoptotic DNA fragmentation.
2. Perform nuclei staining by immersing slides in Hoechst solution (see section 5.3.8) and mount with an aqueous mounting medium specifically designed to preserve fluorescence. Let the slides dry for 1 h at room temperature and store them at 4 °C.
3. Image the slides with a fluorescence microscope.

Representative Results

Mechanical retinal injury
Retinal sections of tadpoles subjected to the mechanical injury described in protocol section 1 show that the retinal lesion encompasses all layers of the tissue while remaining limited to the puncture site (Figure 2A,B).

Conditional rod cell ablation using the NTR-MTZ system
The eyes of anesthetized Tg(rho:GFP-NTR) transgenic tadpoles treated with MTZ treatment, as described in protocol section 2, were analyzed under the stereomicroscope (Figure 3A,B). The decrease in GFP fluorescence reveals the progressive targeted rod cell ablation compared to the controls (Figure 3B), confirmed on retinal sections by GFP immunostaining, as described in protocol section 5 (Figure 3C).

Rod cell degeneration by CRISPR/Cas9-mediated rhodopsin knockout
Retinas of rho crispant tadpoles, obtained as described in protocol section 3, were analyzed as described in protocol section 5 (Figure 4A). Caspase 3 and Rhodopsin labeling highlights that some rods undergo apoptosis (Figure 4B). H&E staining reveals global preservation of nuclear layers but a severe shortening of photoreceptor outer segments (Figure 4C). Further immunostaining analysis with photoreceptor markers show the degeneration of rods and subsequent cone defects (Figure 4D and not shown). The phenotype begins to be visible from stage 40 onward, and the outer segments of rods progressively disappear until they are absent from the central retina from stage 47.

Retinal cell degeneration by cytotoxic intraocular CoCl₂ injections
Retinas of tadpoles subjected to CoCl₂ intraocular injections, as described in protocol section 4, were analyzed by immunostaining and TUNEL assay, as described in protocol section 5 (Figure 5A). This reveals that 10 mM CoCl₂ injection leads to specific cell death of cone photoreceptors (Figure 5B,C) while 25 mM leads to broad retinal cell death (Figure 5E). Immunostaining analysis, as described in protocol section 5, further revealed the absence of cones in 10 mM CoCl₂-injected retinas (Figure 5D) and a severe loss of both bipolar cells and photoreceptors following 25 mM CoCl₂ injections (Figure 5F).

Figure 1: Illustrations of some experimental procedures. (A) A 0.2 mm diameter pin attached to a pin holder is used to puncture the retina. The diagrams of the dorsal, lateral, and frontal views of a tadpole illustrate where the pin (in red) is inserted. (B) Schematic representation of the transgenic model of conditional rod cell ablation. The rhodopsin promoter drives the expression of a GFP-Nitroreductase fusion protein in rod cells. When added to the Xenopus rearing water, NTR converts metronidazole to a cytotoxin, specifically ablating GFP-NTR rods. (C) The head of a Tg(rho:GFP-NTR) transgenic tadpole is shown in white light or under fluorescence. The GFP staining in the eye allows the sorting of transgenic tadpoles. (D) One-cell stage embryos on a nylon grid under a stereomicroscope ready to be injected with a Picospritzer microinjection system. (E) Embryos at the neurula stage (schematic in the inset) after injection at the one-cell stage of the CRISPR-Cas9 ribonucleoprotein complex containing fluorescein lysine dextran. Well-injected fluorescent embryos (green arrows) can be distinguished from uninjected ones (white arrows). (F) Image showing the spoon used to transfer the anesthetized tadpoles. (G) Anesthetized tadpoles in a Petri dish over a wet tissue. The capillary inserted in the microinjector allows for intraocular injections of the CoCl₂ solution. (H) Image showing the transfer of a tadpole into a 1 L tank where the animal can be monitored until awakening. Scale bars = 2 mm (C), 1 mm (E). Abbreviations: GFP = green fluorescent protein; NTR = nitroreductase; MTZ = metronidazole; NF = Nieuwkoop and Faber stage. Please click here to view a larger version of this figure.

Figure 2: Mechanical retinal injury. (A) Outline of the experimental procedure used in (B). Xenopus laevis tadpole eyes are punctured and analyzed on retinal sections 7 days post injury. The dotted box indicates the imaged area. (B) Cell nuclei are counterstained with Hoechst. Three different retinas are shown. The arrows point to the injured site that crosses all retinal layers. Scale bar = 50 µm. Abbreviations: dpi = days post injury; GCL = ganglion cell layer; INL = inner nuclear layer; ONL = outer nuclear layer. Please click here to view a larger version of this figure.

Figure 3: Conditional rod cell ablation using the NTR-MTZ system. (A) Outline of the experimental procedure used in (B,C). Tg(rho:GFP-NTR) transgenic Xenopus laevis tadpoles are treated with MTZ for 7-9 days. The progressive degeneration of the GFP-labeled rods can be monitored in real-time under a fluorescence stereomicroscope as illustrated at 7 days in (B). Rod cell death can also be analyzed on retinal sections as illustrated after 14 days in (C), the dotted box indicating the imaged area. (B) After 7 days of treatment, the GFP intensity in the retina decreases with time in transgenic MTZ-treated tadpoles compared to controls. (C) The decrease in GFP fluorescence is confirmed on retinal sections at 14 days by GFP immunostaining. Cell nuclei are counterstained in blue with Hoechst. Scale bars = 500 µm (B), 50 µm (C). Abbreviations: GFP = green fluorescent protein; NTR = nitroreductase; MTZ = metronidazole; L = lens; R = retina; GCL = ganglion cell layer; INL = inner nuclear layer; ONL = outer nuclear layer; OS = outer segments. Please click here to view a larger version of this figure.

Figure 4: Rod degeneration in Xenopus laevis rho crispants. (A) Outline of the experimental procedure used in (B-D). One-cell stage embryos are injected with the CRISPR-Cas9 ribonucleoprotein complex (gRNA duplex/Cas9 protein) containing the fluorescent lysin dextran. At the neurula stage, fluorescent injected embryos can be sorted and allowed to develop until various stages to perform (B) cleaved Caspase 3 immunostaining for cell death analysis, or (C) hematoxylin and eosin staining for anatomical analysis, or (D) immunostaining with rod markers for photoreceptor cell degeneration analysis. The dotted box indicates the imaged area. (B) Double labeling of cleaved Caspase 3 (a marker of apoptotic cells) and Rhodopsin (a marker of rod outer segments) on retinal sections of control or rho crispants Xenopus laevis embryos at stage 39 shows an absence of dying cells in the controls and that dying cells in rho crispants are rod photoreceptors. (C) H&E staining on retinal sections of rho crispants Xenopus laevis tadpoles at stage 48 reveals the decreased size of photoreceptors' outer segments compared to controls. (D) Recoverin (a marker of rod inner segments) and Rhodopsin co-immunostaining on retinal sections of rho crispants Xenopus laevis tadpoles at stage 48 reveals a severe degeneration compared to controls. Cell nuclei are counterstained in blue with Hoechst. Scale bars = 50 µm. Abbreviations: gRNA = guide RNA; H&E = hematoxylin and eosin; GCL = ganglion cell layer; INL = inner nuclear layer; ONL = outer nuclear layer; OS = outer segments. Please click here to view a larger version of this figure.

Figure 5: Retinal cell degeneration by cytotoxic intraocular CoCl₂ injections. (A) Outline of the experimental procedure used in (B-F). The dotted box indicates the imaged area. A solution of 10 mM or 25 mM CoCl₂ is intraocularly injected into the tadpole eye. Cell apoptosis is analyzed by a TUNEL assay 2 days post injury (dpi) (B,C,E), while retinal cell degeneration is analyzed 7 to 14 dpi by immunostaining with various markers (D,F). (B–D) Retinal sections of tadpoles injected with a saline solution (Controls) or with a 10 mM CoCl₂ solution at stages 51-54. (B) Cell death analysis at 2 dpi reveals the presence of dying cells following CoCl₂ injection mainly in the photoreceptor nuclear layer. (C) Coupling cell death staining with S/M Opsin (a marker of cones) immunostaining reveals that these dying cells are mainly cones; arrows point to double-labeled cells. (D) S/M Opsin (a marker of cones) and Rhodopsin (a marker of rods) co-immunostaining reveals a severe decrease of cone cell labeling in CoCl₂ injected retinas compared to controls at 14 dpi. (E,F) Retinal sections of tadpoles injected with a 25 mM CoCl₂ solution at stages 51-54. (E) Cell death analysis at 2 dpi reveals the presence of dying cells in both the photoreceptor and the inner nuclear layers. (F) Otx2 (a marker of both photoreceptors and bipolar cells) immunostaining reveals a severe decrease of the staining in both layers in CoCl₂-injected retinas compared to controls at 7 dpi, indicating CoCl₂-induced cell death of both photoreceptors and bipolar cells. Cell nuclei are counterstained in blue with Hoechst. Scale bars: 25 µm. Abbreviations: ONL = Outer Nuclear Layer; INL = Inner Nuclear Layer; GCL = Ganglion Cell Layer. Please click here to view a larger version of this figure.

Discussion

Advantages and disadvantages of various retinal injury paradigms in Xenopus tadpoles

Mechanical retinal injury
Various surgical injuries of the neural retina have been developed in Xenopus tadpoles. The neural retina may either be entirely removed¹⁵^,¹⁶ or only partly excised¹⁶^,¹⁷. The mechanical injury presented here does not involve any retinal excision but a simple eye puncture that we previously developed in Xenopus tadpoles⁶. Given the manual procedure of such a mechanical retinal injury model, the phenotype may vary significantly from one tadpole to another. Moreover, the replicability and the extent of the damage may also vary depending on who is performing the experiment. We, therefore, recommend that the same person perform all the injury procedures.

Conditional rod cell ablation using the NTR-MTZ system
The NTR-MTZ system has been used to ablate rod cells in the transgenic Xenopus retina⁶^,⁷^,⁸^,¹⁸. The duration of the MTZ treatment varies significantly from one study to another, from 2 to 7 days. This may reflect different activities of the NTR depending on the chromosomal insertion in the different transgenic lines. Moreover, we noticed some variability in the response of Tg(rho:GFP-NTR) tadpoles for a given time of MTZ treatment, with some experiencing severe rod degeneration while others exhibiting very little damage. Extending the MTZ treatment from 7 to 9-10 days with this transgenic line seems to reduce such variability. However, caution should be exercised given the potentially toxic effects of MTZ. The obvious advantages of this model are that it allows for conditional and reversible rod cell ablation and for live monitoring of rod degeneration.

Rod cell degeneration by CRISPR/Cas9-mediated rhodopsin knockout
The CRISPR-Cas9 rho gene editing model of retinitis pigmentosa leads to rod cell degeneration in Xenopus tadpole¹¹. However, in contrast to the NTR-MTZ model, rod cell ablation is constitutive and not reversible. Interestingly, the high efficiency of this approach (we now regularly obtain >90% of tadpoles exhibiting severe rod degeneration) allows working on this model on the F0 generation. We were initially working with sgRNA but noticed variability from different batches of RNA preparations. We recently found that ordering synthetic crRNA and tracrRNA and preparing gRNA duplex as described in this protocol provides more reliable results.

Retinal cell degeneration by cytotoxic intraocular CoCl₂ injections
This model has several advantages over the other models described here. It allows not only to induce the ablation of retinal cell types conditionally but also to modulate the severity of the damage¹⁴. Moreover, it represents to our knowledge the only model of specific cone degeneration in Xenopus. Finally, it generates low variability in the degenerative phenotype.

Efficacy of the four retinal lesion paradigms
To take into account the potential variability of phenotypes from one batch of tadpoles to another, it is recommended to check the efficacy of retinal degeneration on 8-10 tadpoles. In the case of mechanical injury, the damage must be analyzed on the days following injury, as the lesion is no longer visible a week later. In the NTR-MTZ model, rod degeneration is clearly visible 1 week after the end of MTZ treatment. For rho crispants, as rod cell death begins when the photoreceptors fully differentiate, we recommend analyzing degenerative efficiency from stage 45 onwards. In the CoCl₂ model, cell death occurs within a week of injection. With regard to the expected % survival for each method, we would like to note that CRISPR-Cas9 ribonucleoprotein complex injections lead to higher mortality rates in the first 48 h than conventional RNA injections (no growth or survival problems persist after these first 48 h), and therefore, more embryos should be injected as necessary. In contrast, other procedures (mechanical injuries, MTZ treatment, or intraocular CoCl₂ injections) do not pose any survival problems.

Potential applications of these injury paradigms to study retinal regeneration
One potential application of this series of retinal injury models is the study of retinal regeneration. Different sources of retinal stem or stem-like cells can be recruited in a pathological context, including CMZ cells, Müller glial cells, and RPE cells. We have reported that the mechanical injury model, the NRT/MTZ model, and the CRISPR/Cas9 model, are all attractive models for studying Müller cell activation upon injury⁶^,¹¹. Interestingly, in the CoCl₂ model, all three cellular sources can be recruited¹⁴, providing a novel model for studying the mechanisms underlying the recruitment and reprogramming of different retinal cell types.

Offenlegungen

The authors have nothing to disclose.

Acknowledgements

This research was supported by grants to M.P. from the Association Retina France, Fondation de France, FMR (Fondation Maladies Rares), BBS (Association du syndrome de Bardet-Biedl), and UNADEV (Union Nationale des Aveugles et Déficients Visuels) in partnership with ITMO NNP (Institut Thématique Multi-Organisme Neurosciences, sciences cognitives, neurologie, psychiatrie) / AVIESAN (Alliance Nationale pour les sciences de la vie et de la santé).

Materials

1,2-Propanediol (propylène glycol)	Sigma-Aldrich	398039
Absolute ethanol ≥99.8%	VWR chemicals	20821-365
Anti-Cleaved Caspase 3 antibody (rabbit)	Cell signaling	9661S	Dilution 1/300
Anti-GFP antibody (chicken)	Aveslabs	GFP-1020	Dilution 1/500
Anti-M-Opsin antibody (rabbit)	Sigma-Aldrich	AB5405	Dilution 1/500
Anti-mouse secondary antibody, Alexa Fluor 594 (goat)	Invitrogen Thermo Scientific	A11005	Dilution 1/1,000
Anti-Otx2 antibody (rabbit)	Abcam	Ab183951	Dilution 1/100
Anti-rabbit secondary antibody, Alexa Fluor 488 (goat)	Invitrogen Thermo Scientific	A11008	Dilution 1/1,000
Anti-rabbit secondary antibody, Alexa Fluor 594 (goat)	Invitrogen Thermo Scientific	A11012	Dilution 1/1,000
Anti-Recoverin antibody (rabbit)	Sigma-Aldrich	AB5585	Dilution 1/500
Anti-Rhodopsin antibody (mouse)	Sigma-Aldrich	MABN15	Dilution 1/1,000
Anti-S-Opsin antibody (rabbit)	Sigma-Aldrich	AB5407	Dilution 1/500
Apoptotis detection kit (Dead end fluorimetric TUNEL system)	Promega	G3250
Benzocaine	Sigma-Aldrich	E1501	Stock solution 10%
bisBenzimide H 33258 (Hoechst)	Sigma-Aldrich	B2883	Stock solution 10 mg/mL
Butanol-1 ≥99.5%	VWR chemicals	20810.298
Calcium chloride dihydrate (CaCl₂, 2H₂O)	Sigma-Aldrich (Supelco)	1.02382	Use at 0.1 M
Cas9 (EnGen Spy Cas9 NLS)	New England Biolabs	M0646T
Clark Capillary Glass model GC100TF-10	Warner Instruments (Harvard Apparatus)	30-0038
Cobalt(II) chloride hexahydrate (CoCl₂, 6H₂O)	Sigma-Aldrich	C8661	Stock solution 100 mM
Coverslip 24 x 60 mm	VWR	631-1575
Dako REAL ab diluent	Agilent	S202230-2
Dimethyl sulfoxide (DMSO)	Sigma-Aldrich	D8418
Electronic Rotary Microtome	Thermo Scientific	Microm HM 340E
Eosin 1% aqueous	RAL Diagnostics	312740
Fluorescein lysine dextran	Invitrogen Thermo Scientific	D1822
Fluorescent stereomicroscope	Olympus	SZX 200
Gentamycin	Euromedex	EU0410-B
Glycerin albumin acc. Mallory	Diapath	E0012	Use at 3% in water
Hematoxylin (Mayer's Hemalun)	RAL Diagnostics	320550
HEPES potassium salt	Sigma-Aldrich	H0527
Human chorionic gonadotropin hormone	MSD Animal Health	Chorulon 1500
Hydrochloric acid fuming, 37% (HCl)	Sigma-Aldrich (SAFC)	1.00314
L-Cysteine hydrochloride monohydrate	Sigma-Aldrich	C7880	Use at 2% in 0.1x MBS (pH 7.8 – 8.0)
Magnesium Sulfate Heptahydrate (MgSO₄, 7H₂O)	Sigma-Aldrich (Supelco)	1.05886
Metronidazole	Sigma-Aldrich (Supelco)	M3761	Use at 10 mM
Microloader tips	Eppendorf	5242956003
Micropipette puller (P-97 Flaming/Brown)	Sutter Instrument Co.	Model P-97	Program : Heat 700 / Pull 100 / Vel 75 / Time 90 / Unlocked p = 500
Mounting medium to preserve fluorescence, FluorSave Reagent	Millipore	345789
Mounting medium, Eukitt	Chem-Lab	CL04.0503.0500
MX35 Ultra Microtome blade	Epredia	3053835
Needle Agani 25 G x 5/8''	Terumo	AN*2516R1
Nickel Plated Pin Holder	Fine Science Tools	26016-12
Nylon filtration tissue (sifting fabric) NITEX, mesh opening 1,000 µm	Sefar	06-1000/44
Paraffin histowax without DMSO	Histolab	00403
Paraformaldehyde solution (32%)	Electron Microscopy Sciences	EM-15714-S	Use at 4% in 1x PBS pH 7.4
Peel-A-Way Disposable Embedding Molds	Epredia	2219
Pestle	VWR	431-0094
Petri Dish 100 mm	Corning Gosselin	SB93-101
Petri Dish 55 mm	Corning Gosselin	BP53-06
Phosphate Buffer Saline Solution (PBS) 10x	Euromedex	ET330-A
PicoSpritzer Microinjection system	Parker Instrumentation Products	PicoSpritzer III
Pins	Fine Science Tools	26002-20
Polysucrose (Ficoll PM 400 )	Sigma-Aldrich	F4375	Use at 3% in 0.1x MBS
Potassium chloride (KCl)	Sigma-Aldrich	P3911
Powdered fry food : sera Micron Nature	sera	45475 (00720)
Scissors dissection	Fine Science Tools	14090-09
Slide Superfrost	KNITTEL Glass	VS11171076FKA
Slide warmer	Kunz instruments	HP-3
Sodium chloride (NaCl)	Sigma-Aldrich	S7653
Sodium citrate trisodium salt dihydrate (C₆H₅Na₃O₇, 2H₂O)	VWR chemicals	27833.294
Sodium hydrogen carbonate (NaHCO₃)	Sigma-Aldrich (Supelco)	1.06329
Sodium hydroxide 30% aqueous solution (NaOH)	VWR chemicals	28217-292
Stereomicroscope	Zeiss	Stemi 2000
Syringes Omnifix-F Solo Single-use Syringes 1 mL	B-BRAUN	9161406V
trans-activating crRNA (tracrRNA)	Integrated DNA Technologies	1072533
Triton X-100	Sigma-Aldrich	X-100
Tween-20	Sigma-Aldrich	P9416
X-Cite 200DC Fluorescence Illuminator	X-Cite	200DC
Xylene ≥98.5%	VWR chemicals	28975-325

Referenzen

Goldman, D. Müller glial cell reprogramming and retina regeneration. Nature reviews. Neuroscience. 15 (7), 431-442 (2014).
Hamon, A., Roger, J. E., Yang, X. -. J., Perron, M. Müller glial cell-dependent regeneration of the neural retina: An overview across vertebrate model systems. Developmental Dynamics. 245 (7), 727-738 (2016).
García-García, D., Locker, M., Perron, M. Update on Müller glia regenerative potential for retinal repair. Current Opinion in Genetics & Development. 64, 52-59 (2020).
Todd, L., et al. Efficient stimulation of retinal regeneration from Müller glia in adult mice using combinations of proneural bHLH transcription factors. Cell Reports. 37 (3), 109857 (2021).
Hoang, T., et al. Gene regulatory networks controlling vertebrate retinal regeneration. Science. 370 (6519), (2020).
Langhe, R., et al. Müller glial cell reactivation in Xenopus models of retinal degeneration. Glia. 65 (8), 1333-1349 (2017).
Chesneau, A., Bronchain, O., Perron, M. Conditional chemogenetic ablation of photoreceptor cells in Xenopus retina. Methods in Molecular Biology. 1865, 133-146 (2018).
Martinez-De Luna, R. I., Zuber, M. E. Rod-specific ablation using the nitroreductase/metronidazole system to investigate regeneration in Xenopus. Cold Spring Harbor protocols. 2018 (12), (2018).
Zahn, N., et al. Normal Table of Xenopus development: a new graphical resource. Development. 149 (14), (2022).
McNamara, S., Wlizla, M., Horb, M. E. Husbandry, general care, and transportation of Xenopus laevis and Xenopus tropicalis. Methods in Molecular Biology. 1865, 1-17 (2018).
Parain, K., et al. CRISPR/Cas9-mediated models of retinitis pigmentosa reveal differential proliferative response of Müller cells between Xenopus laevis and Xenopus tropicalis. Cells. 11 (5), 807 (2022).
Wlizla, M., McNamara, S., Horb, M. E. Generation and care of Xenopus laevis and Xenopus tropicalis embryos. Methods in Molecular Biology. 1865, 19-32 (2018).
Yuan, S., Sun, Z. Microinjection of mRNA and morpholino antisense oligonucleotides in zebrafish embryos. Journal of Visualized Experiments JoVE. (27), (2009).
Parain, K., Chesneau, A., Locker, M., Borday, C., Perron, M. Regeneration from three cellular sources and ectopic mini-retina formation upon neurotoxic retinal degeneration in Xenopus. bioRxiv. , (2023).
Vergara, M. N., Del Rio-Tsonis, K. Retinal regeneration in the Xenopus laevis tadpole: a new model system. Molecular Vision. 15, 1000-1013 (2009).
Lee, D. C., Hamm, L. M., Moritz, O. L. Xenopus laevis tadpoles can regenerate neural retina lost after physical excision but cannot regenerate photoreceptors lost through targeted ablation. Investigative Ophthalmology & Visual Science. 54 (3), 1859-1867 (2013).
Martinez-De Luna, R. I., Kelly, L. E., El-Hodiri, H. M. The retinal homeobox (Rx) gene is necessary for retinal regeneration. Entwicklungsbiologie. 353 (1), 10-18 (2011).
Choi, R. Y., et al. Cone degeneration following rod ablation in a reversible model of retinal degeneration. Investigative Ophthalmology & Visual Science. 52 (1), 364-373 (2011).

Play Video

PDF

DOI

DOWNLOAD MATERIALS LIST

Diesen Artikel zitieren

Parain, K., Donval, A., Chesneau, A., Lun, J. X., Borday, C., Perron, M. Generating Retinal Injury Models in Xenopus Tadpoles. J. Vis. Exp. (200), e65771, doi:10.3791/65771 (2023).