不锈钢滑面的制备及高温抗粘接性能研究
Summary
滑面为解决粘接问题提供了一种新的方法。本协议描述如何在高温下制造滑面。结果表明, 在高温下, 滑面表面对液体具有抗润湿性, 对软组织具有显著的抗粘附作用。
Abstract
耐高温抗粘连表面具有广泛的应用潜力, 在电刀仪器, 发动机和管道。典型的抗润湿超疏水性表面容易失效, 当暴露在高温液体。最近,猪笼草激发的滑面显示了解决粘附问题的新方法。在滑面上的润滑剂层可以充当被排斥材料与表面结构之间的屏障。然而, 以往研究中的滑面很少表现出耐高温。在这里, 我们描述了一个协议, 以制备耐高温光滑表面。采用光刻辅助法对不锈钢柱结构进行了制备。用盐水 functionalizing 表面, 通过添加硅油来制备光滑的表面。制备的滑面保持了水的抗润湿性, 即使表面加热到300摄氏度。同时, 滑面在高温下对软组织的抗粘连作用也很大。这种类型的不锈钢滑面在医疗设备, 机械设备,等方面的应用。
Introduction
由于其在电刀仪器、发动机、管道等领域的广泛应用潜力, 在高温下用于液体和软组织的抗粘连表面受到了相当大的关注.1,2,3,4. Bioinspired 表面, 特别是超疏水性表面, 被认为是理想的选择, 因为它们具有优异的抗润湿能力和自清洁性能5。在超疏水性表面, 应将抗润湿能力归因于表面结构中的锁定空气。但是, 超疏水性状态不稳定, 因为它位于凯西-巴克斯特状态6, 7 中.同时, 在高温下, 由于从凯西-巴克斯特到 Wenzel 状态8的润湿状态转变, 液滴的抗润湿性可能会失败。这种润湿过渡是由于结构中的小液滴润湿引起的, 导致无法将空气锁定到位。
最近, 由于猪笼草的 peritome 的滑特性,猪笼草, 黄et 等. 报告了一个概念, 通过注入润滑剂到表面结构9,10, 构造光滑的表面 ,11。由于毛细力的缘故, 结构可以牢固地保持润滑剂到位, 就像在超疏水性表面的锁着的空气袋。因此, 润滑剂和表面结构可以形成稳定的固体/液体表面。当润滑剂对表面结构有优先的亲和力时, 复合表面的液滴会很容易滑动, 只有极低的接触角滞后 (例如, ~ 2°)12。这一润滑剂层还使表面具有显著的抗润湿能力13, 显示了医疗设备14,15的巨大潜力。然而, 以往对滑面的研究主要集中在室温或低温条件下的制备。对高温抗滑面的制备研究很少。例如, 张et表明, 润滑油的快速蒸发会迅速导致滑块的性能在稍高的温度下发生故障 (16)。
耐高温滑面可拓宽应用潜力;例如, 它们可以被用作液体屏障, 以减少对电刀器械的软组织粘连。手术过程中, 由于高频电刀提示的高温, 严重的软组织粘连发生。软组织可以烧焦, 导致它坚持的仪器提示, 然后撕裂软组织周围的提示17,18,19。术后粘附软组织对手术有负面影响, 也可能诱发止血失败19,20。这些影响严重损害了人们的健康和经济利益。因此, 解决电切器械软组织粘连问题迫在眉睫。事实上, 滑面提供了一个解决这个问题的机会。
在这里, 我们提出了一个协议, 以制造在高温下可用的滑面。不锈钢因其耐高温而被选为表面材料。采用光刻辅助化学蚀刻法对不锈钢进行了粗糙化。然后, 表面具有生物相容材料的功能, 生理盐水 octadecyltrichlorosilane ()21,22,23,24。通过添加硅油, 制备了一种光滑的表面。这些材料使光滑表面达到耐高温。研究了高温抗润湿性及对软组织的抗粘连作用。结果表明, 在高温下, 利用滑面来解决抗粘接问题的可能性很大。
Protocol
Representative Results
Discussion
本手稿详细介绍了制造耐高温的光滑表面的协议。通过观察水滴的易滑动特性, 证明了所制备表面的光滑性能。通过在热面上沉积水滴, 研究了不同高温条件下制备的滑面的抗润湿性。结果表明, 即使在加热到300摄氏度以上的情况下, 所制备的滑面也保持了其光滑的性能。我们还确定了滑面对软组织的抗粘连作用。
与超疏水性表面不同, 滑面表面结构作为注入润滑剂的保温结构?…
Offenlegungen
The authors have nothing to disclose.
Acknowledgements
这项工作得到了中国国家自然科学基金 (51290292 号赠款) 的支持, 并得到了博士生北航学术优秀基金会的支持。
Materials
| Stainless steel | Hongtu Corporation | 316 | Use as received |
| Octadecyltrichlorosilane | Huaxia Reagent | 112-04-9 | Use as received |
| Photoresist | Kempur Microelectronic Corporation | 317S | Use as received |
| Silicone oil | Beijing Chemical Works | 350 cst | Use as received |
| Anhydrous toluene | Beijing Chemical Works | 108-88-3 | Use as received |
| Phosphoric acid (H3PO4) | Tianjin Chemical Corporation | 7664-38-2 | Use as received |
| Hydrochloric acid (HCl) | Tianjin Chemical Corporation | 7647-01-0 | Use as received |
| Ferric chloride (FeCl3) | Tianjin Chemical Corporation | 7705-08-0 | Use as received |
| Optical upright microscope | Olympus | BX51 | |
| Optical stereo microscope | Olympus | SZX16 | |
| High speed camera | Olympus | i-SPEED LT | |
| Ultrasonic cleaner | KUNSHAN ULTRASONIC INSTRUMENTS CO. LTD | KQ-500E | |
| Dynamometer | Yueqing Handapi Instruments Co. Ltd | HP-5 | |
| Manipulator | Yueqing Handapi Instruments Co. Ltd | HLD | |
| Hot plate | Shenzhen Jingyihuang Corporation | DRB-1 |
Referenzen
- Liu, Y., Chen, X., Xin, J. H. Can superhydrophobic surfaces repel hot water?. J Mater Chem. 19 (31), 5602-5611 (2009).
- Urata, C., Masheder, B., Cheng, D. F., Hozumi, A. A thermally stable, durable and temperature-dependent oleophobic surface of a polymethylsilsesquioxane film. Chem Commun. 49, 3318-3320 (2013).
- Daniel, D., Mankin, M. N., Belisle, R. A., Wong, T. -. S., Aizenberg, J. Lubricant-infused micro/nano-structured surfaces with tunable dynamic omniphobicity at high temperatures. Appl Phys. Lett. 102 (23), 231603 (2013).
- Zhang, P., Chen, H., Zhang, L., Zhang, D. Anti-adhesion effects of liquid-infused textured surfaces on high-temperature stainless steel for soft tissue. Appl Surf Sci. 385, 249-256 (2016).
- Barthlott, W., Neinhuis, C. Purity of the sacred lotus,or escape from contamination in biological surfaces. Planata. 202 (1), 1-8 (1997).
- Feng, L., et al. Super-hydrophobic surfaces: from natural to artificial. Adv Mater. 14 (24), 1857-1860 (2002).
- Li, X. M., Reinhoudt, D., Crego-Calama, M. What do we need for a superhydrophobic surface? A review on the recent progress in the preparation of superhydrophobic surfaces. Chem Soc Rev. 36 (8), 1350-1368 (2007).
- Roach, P., Shirtcliffe, N. J., Newton, M. I. Progess in superhydrophobic surface development. Soft Matter. 4, 224-240 (2008).
- Park, K. C., et al. Condensation on slippery asymmetric bumps. Nature. 531 (7592), 78-82 (2016).
- Wong, T. S., et al. Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity. Nature. 477 (7365), 443-447 (2011).
- Chen, H., et al. Continuous directional water transport on the peristome surface of Nepenthes alata. Nature. 532 (7597), 85-89 (2016).
- Zhang, P., Chen, H., Zhang, L., Ran, T., Zhang, D. Transparent self-cleaning lubricant-infused surfaces made with large-area breath figure patterns. Appl Surf Sci. 355, 1083-1090 (2015).
- Lafuma, A., Quéré, D. Slippery pre-suffused surfaces. EPL. 96, 56001 (2011).
- Epstein, A. K., et al. Liquid-infused structured surfaces with exceptional anti-biofouling performance. P Natl Acad Sci USA. 109 (33), 13182-13187 (2012).
- MacCallum, N., et al. Liquid-infused silicone as a biofouling-free medical material. ACS Biomater Sci Eng. 1, 43-51 (2015).
- Zhang, J., Wu, L., Li, B., Li, L., Seeger, S., Wang, A. Evaporation-induced transition from Nepenthes pitcher-inspired slippery surfaces to lotus leaf-inspired superoleophobic surfaces. Langmuir. 30 (47), 14292-14299 (2014).
- Sutton, P. A., Awad, S., Perkins, A. C., Lobo, D. N. Comparison of lateral thermal spread using monopolar and bipolar diathermy the Harmonic Scalpel™ and the Ligasure™. Brit J Surg. 97 (3), 428-433 (2010).
- Koch, C., Friedrich, T., Metternich, F., Tannapfel, A., Reimann, H. P., Eichfeld, U. Determination of temperature elevation in tissue during the application of the harmonic scalpel. Ultrasound Med Biol. 29 (2), 301-309 (2003).
- Sinha, U. K., Gallagher, L. A. Effects of steel scalpel, ultrasonic scalpel, CO2 laser, and monopolar and bipolar electrosurgery on wound healing in guinea pig oral mucosa. Laryngoscope. 113 (2), 228-236 (2003).
- Lee, J. H., Go, A. K., Oh, S. H., Lee, K. E., Yuk, S. H. Tissue anti-adhesion potential of ibuprofen-loaded PLLA-PEG diblock copolymer films. Biomaterials. 26 (6), 671-678 (2005).
- Ding, J. N., Wong, P. L., Yang, J. C. Friction and fracture properties of polysilicon coated with self-assembled monolayers. Wear. 260 (1-2), 209-214 (2006).
- Kulkarni, S. A., Mirji, S. A., Mandale, A. B., Vijayamohanan, K. P. In vitro stability study of organosilane self-assemble monolayers and multilayers. Thin Solid Films. 496, 420-425 (2006).
- Meth, S., Savchenko, N., Viva, F. A., Starosvetsky, D., Groysman, A., Sukenik, C. N. Siloxane-based thin films for corrosion protection of stainless steel in chloride media. J Appl Electrochem. 41 (8), 885-890 (2011).
- Zhang, P., Chen, H., Zhang, L., Zhang, Y., Zhang, D., Jiang, L. Stable slippery liquid-infused anti-wetting surface at high temperatures. J Mater Chem A. 4 (31), 12212-12220 (2016).
- Smith, J. D., et al. Droplet mobility on lubricant-impregnated surfaces. Soft Matter. 9 (6), 1772-1780 (2013).
- Tran, T., Staat, H. J. J., Prosperetti, A., Sun, C., Lohse, D. Drop impact on superheated surfaces. Phys Rev Lett. 108 (3), 036101 (2012).
- Donzelli, J., Leonetti, J. P., Wurster, R. D., Lee, J. M., Young, M. R. I. Neuroprotection due to irrigation during bipolar cautery. Arch Otolaryngol. 126 (2), 149-153 (2000).
