Journal
/
工程学
/
Micromechanical Tension Testing of Additively Manufactured 17-4 PH Stainless Steel Specimens
JoVE 杂志
工程学
This content is Free Access.
JoVE 杂志 工程学
Micromechanical Tension Testing of Additively Manufactured 17-4 PH Stainless Steel Specimens
Please note that all translations are automatically generated. Click here for the English version.

Micromechanical Tension Testing of Additively Manufactured 17-4 PH Stainless Steel Specimens

2,978 Views

•

05:38 min

•

April 07, 2021

DOI:

10.3791/62433-v

DOI:
10.3791/62433-v

•

05:38 min
April 07, 2021

•

3 Views
, , , , ,
1Department of Civil Engineering,University of Arkansas, 2Department of Mechanical Engineering,University of Arkansas

Summary

Automatically generated

Presented here is a procedure for measuring fundamental material properties through micromechanical tension testing. Described are the methods for micro-tensile specimen fabrication (allowing rapid micro-specimen fabrication from bulk material volumes by combining photolithography, chemical etching, and focused ion beam milling), indenter tip modification, and micromechanical tension testing (including an example).

Explore More Videos

Micromechanical Tension TestingAdditively Manufactured17-4 PH Stainless SteelPhotolithographyMicro Tensile GripWet EtchingSample AlignmentPolishingDicing SawSpin CoderPhoto ResistPhoto MaskPropylene Glycol Monomethyl Ether AcetateEtchingMicro Electromechanical SystemsMEMS

Read Article

Cite this Article

Gonzalez-Nino, D., Sonntag, S., Afshar-Mohajer, M., Goss, J., Zou, M., Prinz, G. S. Micromechanical Tension Testing of Additively Manufactured 17-4 PH Stainless Steel Specimens. J. Vis. Exp. (170), e62433, doi:10.3791/62433 (2021).

Download .ris file

Copy

Share Video

.

Copy