Journal
/
工程学
/
Applicability Analysis of Assessment Methods for Morphological Parameters of Corroded Steel Bars
JoVE 杂志
工程学
需要订阅 JoVE 才能查看此.  登录或开始免费试用。
JoVE 杂志 工程学
Applicability Analysis of Assessment Methods for Morphological Parameters of Corroded Steel Bars

Applicability Analysis of Assessment Methods for Morphological Parameters of Corroded Steel Bars

DOI:
10.3791/57859-v

•

10:24 min

•

November 01, 2018

•

, , ,
1Department of Civil Engineering,Shenzhen University, 2Guangdong Province Key Laboratory of Durability for Marine Civil Engineering,Shenzhen University, 3Department of Engineering and the Built Environment,Anglia Ruskin University

Chapters

  • 00:04Title
  • 01:15Initial Specimen Testing
  • 05:00Specimen Corrosion and Subsequent Testing
  • 07:41Results: Comparison of Measurement Methods
  • 09:14Conclusion

Summary

自动翻译

自动翻译

This paper measures the geometry and the amount of corrosion of a steel bar using different methods: mass loss, calipers, drainage measurements, 3D scanning, and X-ray micro-computed tomography (XCT).

Tags

Corrosion MeasurementSteel BarSurface Morphology3D ScanningXCTVernier CaliperDrainage MeasurementMass LossCross-sectionUniversal Testing Machine

Article

Embed

添加到播放列表

Usage Statistics

Related Videos

Mechanical Expansion of Steel Tubing as a Solution to Leaky Wellbores

Blast Quantification Using Hopkinson Pressure Bars

Advanced Experimental Methods for Low-temperature Magnetotransport Measurement of Novel Materials

Experimental Methods for Investigation of Shape Memory Based Elastocaloric Cooling Processes and Model Validation

The Evolution of Silica Nanoparticle-polyester Coatings on Surfaces Exposed to Sunlight

Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes

Subsurface Defect Localization by Structured Heating Using Laser Projected Photothermal Thermography

Preparation and High-temperature Anti-adhesion Behavior of a Slippery Surface on Stainless Steel

Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior

Generating Lap Joints Via Friction Stir Spot Welding on DP780 Steel

Read Article