Summary

核酸のポリアニリンベースのセンサ

Published: November 01, 2016
doi:

Summary

Nucleic acids are common analytes for assessing biological systems; however, bias from enzymatic manipulation can cause concern. Here a method is described for label-free detection of nucleic acids using polyaniline. This sensitive, cost-effective sensor technology can distinguish single nucleotide differences between molecules.

Abstract

Detection of nucleic acids is at the center of diagnostic technologies used in research and the clinic. Standard approaches used in these technologies rely on enzymatic modification that can introduce bias and artifacts. A critical element of next generation detection platforms will be direct molecular sensing, thereby avoiding a need for amplification or labels. Advanced nanomaterials may provide the suitable chemical modalities to realize label-free sensors. Conjugated polymers are ideal for biological sensing, possessing properties compatible with biomolecules and exhibit high sensitivity to localized environmental changes. In this article, a method is presented for detecting nucleic acids using the electroconductive polymer polyaniline. Simple DNA “probe” oligonucleotides complementary to target nucleic acids are attached electrostatically to the polymer, creating a sensor system that can differentiate single nucleotide differences in target molecules. Outside the specific and unbiased nature of this technology, it is highly cost effective.

Introduction

Conjugated polymers provide many options for molecular sensors. This includes fluorescence, electronic, and colorimetric responses1. There have been many efforts to incorporate conjugated polymers in nucleic acid sensors. However, most systems require secondary detection, limiting sensing options2. Recently, we reported a conjugated polymer-based sensor platform built on polyaniline (PANI) that exploits properties of this polymer, creating a label-free system3. PANI is an extensively conjugated electro-active polymer with properties such as fluorescence and resistance that are suitable for measuring biological systems4. The excitons within the structure are not localized leading to mobility of the positive charge between monomeric subunits. This provides a flexible scaffold of positive charges that can interact with the negatively charged backbone of DNA5,6. Importantly, electrostatically attached DNA is orientated such that nitrogenous bases can participate in base pairing. Association with DNA alters the electronic properties of PANI, an effect that can be enhanced by UV irradiation (Figure 1)3. Using this system, oligonucleotides complementary to target nucleic acids can be immobilized on PANI. Multiple studies have demonstrated that upon hybridization electrostatically adsorbed oligonucleotides dissociate from PANI or other cationic matrices due to conformational changes caused by the switch to a double-stranded DNA structure3,5,7.

In a sensor system where probe attachment modulates conjugated polymer properties, hybridization events can be transduced without labels or enzymatic modification of probes or target nucleic acids. Conjugated polymers offer great flexibility in detection methods, one of which is fluorescence. Through monitoring PANI fluorescence, concentrations of target nucleic acids as low as 10-11 M (10 pM) can be detected3. Detection is rapid, occurring within 15 minutes of hybridization, and specific where a single mismatch in a target molecule can be differentiated3.

Fabrication of PANI-sensors is straightforward. High molecular weight PANI can be generated that is well-dispersed in water using standard synthesis procedures involving aniline monomer, surfactant, and controlled addition of an oxidant. Yield can be very high and unreacted oxidant removed by washing with water, ensuring no further PANI growth. PANI-probe association occurs spontaneously upon mixture, and complex formation is enhanced by mild UV exposure. Hybridization can be carried out immediately, and the changes in PANI fluorescence assayed following a short incubation. The simplicity of this technology makes it highly accessible to many laboratories.

Protocol

1.加工可能PANI合成 250mL丸底フラスコ中で完全にクロロホルム60ml中のアニリン(1 mlの11ミリモル)に溶解します。 5分間600rpmで撹拌し、氷で0〜5℃に冷却します。これは通常、15〜20分( 図2A)を取ります。 600rpmで攪拌しながら、ドデシルベンゼンスルホン酸ナトリウム(NaDBS)(て7.44 gの21ミリモル)丸底フラスコ中のアニリンの溶液に加えます。 20ミリリ?…

Representative Results

図2Aは、APSの添加前に、 すなわち 、重合プロセスの開始時に反応セットアップを取り込みます。ミセル形成は、ミセル界面におけるプロセス-PANI合成が起こる反応の最初のステップである。 図2Bは、5分後に乳白色の解決策を示しています。 APSの30分後、反応はやや褐色に変わり追加されます。 図2Cは、オリゴマーの形成?…

Discussion

核酸のPANIベースのセンサーは、DNAやRNAと相互作用するために、水中でのポリマーの可溶化を必要とします。水中のPANI分散物は、以前8報告されているように、ミセルを形成する界面活性剤を使用して達成されます。 4-スルホフタル酸ドデシルエステルなどの他の陰イオン界面活性剤ここで用いられるNaDBSに加えて、ノニルフェノールエトキシレート、またはセチルトリメチルアンモニ…

Disclosures

The authors have nothing to disclose.

Acknowledgements

The authors have nothing to disclose.

Materials

Aniline  Fisher Scientific  A7401-500  ACS, liquid, refrigerated
Ammonium peroxydisulfate Fisher Scientific  A682-500  ACS, crystalline
Sodium dodecylbenzene sulfonate Pfaltz & Bauer  D56340  95% solid
Chloroform  Fisher Scientific  MCX 10601  Liquid
DNA primers  MWG operon  n/a  custom DNA sequence ~20bps
Microplate  USA Scientific  1402-9800  96 well, polypropylene as it is unreactive to chloroform
Microplate Adhesive Film USA Scientific  2920-0000  Reduces well-to-well contamination, sample spillage and evaporation
Microscope Cover Glass Fisher Scientific  12-544-D  PANI coated on UV irradiated cover glass
UV crosslinker  UVP  HL-2000  Energy: X100 μJ/cm2; Time: 2min
Hybridization Oven VWR  01014705 T  Temperature: 400C; with rocking for 15 min
Glass Apparatus  Fisher Scientific Three necked round bottom flask for reaction; dropping funnel, stoppers, condenser, separating funnel
Microscope Leica Microsystems  Leica IMC S80 Magnification 20X; Pseudo color 536 nm; Exposure 86 ms; Gain 1.0X; Gamma 1.6
Microplate Reader Molecular Devices  89429-536

References

  1. Hahm, J. I. Functional polymers in protein detection platforms: optical, electrochemical, electrical, mass-sensitive, and magnetic biosensors. Sensors (Basel). 11 (3), 3327-3355 (2011).
  2. Rahman, M. M., Li, X. B., Lopa, N. S., Ahn, S. J., Lee, J. J. Electrochemical DNA hybridization sensors based on conducting polymers. Sensors (Basel). 15 (2), 3801-3829 (2015).
  3. Sengupta, P. P., et al. Utilizing Intrinsic Properties of Polyaniline to Detect Nucleic Acid Hybridization through UV-Enhanced Electrostatic Interaction. Biomacromolecules. 16 (10), 3217-3225 (2015).
  4. Song, E., Choi, J. -. W. Conducting Polyaniline Nanowire and Its Applications in Chemiresistive Sensing. Nanomaterials. 3 (3), 498 (2013).
  5. Liu, S., et al. Polyaniline nanofibres for fluorescent nucleic acid detection. Nanoscale. 3 (3), 967-969 (2011).
  6. Oliveira Brett, A. M., Chiorcea, A. -. M. Atomic Force Microscopy of DNA Immobilized onto a Highly Oriented Pyrolytic Graphite Electrode Surface. Langmuir. 19 (9), 3830-3839 (2003).
  7. Zhang, Y., et al. Poly(m-Phenylenediamine) Nanospheres and Nanorods: Selective Synthesis and Their Application for Multiplex Nucleic Acid Detection. PLoS ONE. 6 (6), e20569 (2011).
  8. Namgoong, H., Woo, D. J., Lee, S. -. H. Micro-chemical structure of polyaniline synthesized by self-stabilized dispersion polymerization. Macromol Res. 15 (7), 633-639 (2007).
  9. John, A., Palaniappan, S., Djurado, D., Pron, A. One-step preparation of solution processable conducting polyaniline by inverted emulsion polymerization using didecyl ester of 4-sulfophthalic acid as multifunctional dopant. J Polym Sci A: Polym Chem. 46 (3), 1051-1057 (2008).
  10. El-Dib, F. I., Sayed, W. M., Ahmed, S. M., Elkodary, M. Synthesis of polyaniline nanostructures in micellar solutions. J Appl Polym Sci. 124 (4), 3200-3207 (2012).
  11. Tsotcheva, D., Tsanov, T., Terlemezyan, L., Vassilev, S. Structural Investigations of Polyaniline Prepared in the Presence of Dodecylbenzenesulfonic Acid. J Therm Anal Calorim. 63 (1), 133-141 (2001).
  12. Jia, W., et al. Polyaniline-DBSA/organophilic clay nanocomposites: synthesis and characterization. Synthetic Met. 128 (1), 115-120 (2002).
  13. Kim, B. -. J., Oh, S. -. G., Han, M. -. G., Im, S. -. S. Preparation of Polyaniline Nanoparticles in Micellar Solutions as Polymerization Medium. Langmuir. 16 (14), 5841-5845 (2000).
  14. Scales, C. W., et al. Corona-Stabilized Interpolyelectrolyte Complexes of siRNA with Nonimmunogenic, Hydrophilic/Cationic Block Copolymers Prepared by Aqueous RAFT Polymerization†. Macromolecules. 39 (20), 6871-6881 (2006).
  15. Kadashchuk, A., et al. Localized trions in conjugated polymers. Phys Rev B. 76 (23), 235205 (2007).
  16. Chang, H., Yuan, Y., Shi, N., Guan, Y. Electrochemical DNA Biosensor Based on Conducting Polyaniline nanotube Array. Anal. Chem. 79, 5111-5115 (2007).
  17. Zhu, N., Chang, Z., He, P., Fang, Y. Electrochemically fabricated polyaniline nanowire-modified electrode for voltammetric detection of DNA hybridization. Eletrochim. Acta. 51, 3758-3762 (2006).

Play Video

Cite This Article
Sengupta, P. P., Gloria, J. N., Parker, M. K., Flynt, A. S. A Polyaniline-based Sensor of Nucleic Acids. J. Vis. Exp. (117), e54590, doi:10.3791/54590 (2016).

View Video